Skip to content
*Free Shipping above RM300 for West Malaysia (T&C applies)
*Free Shipping above RM300 for West Malaysia (T&C applies)

The highest level of functionality and safety yet packaged into a home-like design for the dignity and well-being of the user.

The wide range of functions offered by this type of bed is to the following advantages of Sentida 6:

  • Safety of residents and caregivers
  • Prevention of falls
  • Prevention of pressure injuries
  • Care of dementia patients
  • Functional independence and mobility
  • Continence care
  • Ease of use

 Why Sentida. Read further

Mobile Nursing Care Bed | Wissner-Bosserhoff Sentida 6

No reviews
SKU ABAH010
Save 3% Save 3%
Original price RM 16,500.00
Original price RM 16,500.00 - Original price RM 16,500.00
Original price RM 16,500.00
Current price RM 15,980.00
RM 15,980.00 - RM 15,980.00
Current price RM 15,980.00
Features and Benefits

Please refer Sentida Brochure here

1. Patented SafeFree® side guard concept

  • Can be adjusted to 4 different heights
  • No middle post, no dangerous middle gap
  • Access to residents in 4 sec. at the most
  • No space is needed on the side

2. 3-stop-strategy

Height Adjustments ranging from 25cm to 80 cm allow different levels of accessibility for the patient.

  • 27 cm = Sleep
  • 41 cm = Mobilization
  • 80 cm = Nursing care

3. Comfort Seating Position

The Sentida comes with a pre-programmed seating position for patients, adjusted for maximum comfort in a seated position at a comfortable height, perfect for reading, watching TV, meals, and other activities!

4. BiNetic patient surface

DBfK-backrest + 11 cm

It also comes with a unique BiNetic patient surface with double retraction for effective pressure ulcer prevention. This means the bed panels extend outwards when shifting to a reclining position, allowing the user to rest comfortably instead of being folded up in a cramped position.

Your benefit: Reduction in compression and in friction and shearing forces thanks to leg rest retraction by an additional 6 cm

5. Integrated bed extension

Express bed extension with a standard cable pull for divided side guards. Bed length is adjusted without any tools in a matter of seconds.

An Integrated Bed Extension up to 20cm allows more comfort for taller patients and it comes with a Smart Handset with 3 modes (Nursing, Resident and Locking Mode)

6. Handset SafeControl®

In addition to its clarity and ergonomic design, the SafeControl® handset stands out due to its intuitive operation. Thanks to motion sensors and controlled backlighting, all selectable functions are displayed to the operator, ensuring easy operation. This ensures easy operation, especially at night.

7. PrimaCare 10 Mattress

PrimaCare 10 is a 14-cm-high, single-layer mattress made of polyether foam with a bedsore-prevention profile on the upper side.

The mattress core consists of a solid block of cold polyurethane foam with a profiled upper side that is designed for improved pressure distribution. It also provides for more comfort while lying down, as the mattress adjusts to the body.

With the correct positioning of the patient, the mattress is suitable for patients with up to a third-degree risk of incidence of pressure ulcers.

We reserve the right to replace the PrimaCare 10 mattress with an alternative option if the PrimaCare 10 mattress is unavailable.

Size: 200cm x 87cm x 14 cm

Max patient weight 200kg (lying down)

8. Night light function (Optional, Additional Cost for this feature)

Switchable ON/OFF via handset

  • Helps the resident find their way at night
  • More safety for the resident
  • Simple power connection control

9. SafeFree Flex

In addition to fixed side elements, our SafeFree Flex side rail concept offers individual and future-oriented as much freedom as possible and as much protection as necessary. This allows you to react flexibly and budget-friendly to the needs of your residents.

10. Add on Feature: Automated Pressure Relief by automatic repositioning by Careturner as it operates very silently and without any vibration

Product Specifications

Dimension: 208 x 106cm
Bed Weight: 115kg~130kg
Height Adjustment of 25cm to 80 cm
Integrated Bed Extension up to 20cm
Maximum weight capacity: 270kg

About Wissner-Bosserhoff
The Wissner-Bosserhoff group and the Linet group have been closely linked for more than twenty years now. The companies are managed by LINET Group SE, based in the Netherlands. Operational activity is conducted in more than 110 countries with more than 1,700 employees at two production sites, in Germany and the Czech Republic, as well as sales offices in Europe and the U.S. In the fiscal year 2019/2020, LINET Group SE made a net turn-over of approx. 287 million euros and, with approx. 107,000 high-quality nursing homes and hospital beds, is Europe's leading provider.

Certification

Product Reg. No.: GA3555322-106776
Registered under Act 737

Warranty

2 year warranty on manufacturing defects

Made in Germany

Shipping & Installation

Within Klang Valley - RM500.00 (Ground Floor) (Please contact us for a quotation if you would like to install the bed on a higher floor)
Other location - Provide the address to check the delivery fee.

**Please provide a video of the pathway from the front entrance of your home to the room where you would prefer the bed to be installed before delivery.

**If you wish to install the bed on a higher floor, please send us a picture and measurements of your stairway and room where you would prefer the bed to be installed before delivery.

Features and Benefits

Portfolio

Portfolio

Model: Sentida 6

Movability: At every bed height

Castors: 100, 125 or 150 mm easy-roll castors, or 125 mm double or design castors

Braking capacity: Foot-end brake bar with 4-castor central braking system

Safe working load: 270 kg

Height adjustment:

  • 27-80 cm with 100 mm easy-roll castors
  • 29.5-82.5 cm with 125 mm easy-roll castors
  • 28-81 cm with 125 mm double or design castors
  • 32-85 cm with 150 mm easy-roll castors

Patient surface:

  • 87/100 x 200/210/220 cm (sentida 6 & 6-d*)
  • 100 x 200/210/220 cm (sentida 6-xl)
  • 79 cm x 200 cm (sentida 6-s)
  • 79 cm x 190 cm (sentida 6-xs)

Patented SafeFree® side guard concept

Patented SafeFree® side guard concept

  • Can be adjusted to 4 different heights
  • No middle post, no dangerous middle gap
  • Access to residents in 4 sec. at the most
  • No space needed on the side
3-stop-strategy

3-stop-strategy

Height Adjustments ranging from 25cm to 80 cm allow different levels of accessibility for the patient.

  • 80 cm = Nursing care
  • 41 cm = Mobilization
  • 27 cm = Sleep
Comfort Seating Position

Comfort Seating Position

The Sentida comes with a pre-programmed seating position for patients, adjusted for maximum comfort in a seated position at a comfortable height, perfect for reading, watching TV, meals, and other activities!

BiNetic lying surface with double retraction for effective pressure ulcer prevention

BiNetic lying surface with double retraction for effective pressure ulcer prevention

DBfK-backrest + 11 cm

It also comes with a unique BiNetic patient surface with double retraction for effective pressure ulcer prevention. This means the bed panels extend outwards when shifting to a reclining position, allowing the user to rest comfortably instead of being folded up in a cramped position.

Your benefit: Reduction in compression and in friction and shearing forces thanks to leg rest retraction by an additional 6 cm

Handset SafeControl®

In addition to its clarity and ergonomic design, the SafeControl® handset stands out due to its intuitive operation. Thanks to motion sensors and controlled backlighting, all selectable functions are displayed to the operator, ensuring easy operation. This ensures easy operation, especially at night.

Integrated bed extension

Integrated bed extension

Express bed extension with a standard cable pull for divided side guards.
Bed length is adjusted without any tools in a matter of seconds.

An Integrated Bed Extension up to 20cm allows more comfort for taller patients and it comes with a Smart Handset with 3 modes (Nursing, Resident and Locking Mode)

Night light function

Night light function

(Optional, Additional Cost for this feature)

Switchable ON/OFF via handset

  • Helps the resident find their way at night
  • More safety for the resident
  • Simple power connection control
SafeFree® Flex

SafeFree® Flex

In addition to fixed side elements, our SafeFree Flex side rail concept offers individual and future-oriented as much freedom as possible and as much protection as necessary. This allows you to react flexibly and budget-friendly to the needs of your residents.

 PrimaCare 10 Mattress

 PrimaCare 10 Mattress

PrimaCare 10 is a 14-cm-high, single-layer mattress made of polyether foam with a bedsore-prevention profile on the upper side.

The mattress core consists of a solid block of cold polyurethane foam with a profiled upper side that is designed for improved pressure distribution. It also provides for more comfort while lying down, as the mattress adjusts to the body.

With the correct positioning of the patient, the mattress is suitable for patients with up to a third-degree risk of incidence of pressure ulcers.

We reserve the right to replace the PrimaCare 10 mattress with an alternative option if the PrimaCare 10 mattress is unavailable.

Size: 200cm x 87cm x 14 cm

Max patient weight 200kg (lying down)

Add-on Feature

Careturner

Careturner

(Additional Cost for this feature)

Automated Pressure Relief by automatic repositioning by Careturner as it operates very silently and without any vibration

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare