Pill Cutter With Lock | EVIN

Instructions 
1. Wash before initial use with warm, soapy water. Rinse and allow to air dry completely before using. Repeat between uses and remove residue from the blade with a thick washcloth, be careful not to come in direct contact with the blade. 
2. To lock, open the lid and insert locking bar (A) into the hole on the front side of the cutter with the tab of the locking bar pointing towards the hinge. Press until it snaps into place (B). Close the lid to the lock cutter. To remove it again, open the cutter. 
3. To open, press on the optional locking bar, if used, and l up the cover. 
4. Place the pill in a V-shaped holder. 
5. Close the cover to cut the pill. 
6. Remove the cut halves of the pill. 
7. Close the cover and store the cutter in a closed position. 

WARNING 
Keep out of reach of children. Avoid direct contact with the blade as it is very sharp. Discard the product when the blade no longer optimally performs. Note that enteric-coated tablets are intended to be swallowed whole and should never be cut before taking.